Polyethylene Compounds
(Fiberglass Filled)
| MATERIAL TYPE | FIBERGLASS/POLYETHYLENE | ||
| Part No. | PE8110N | PE8120N | PE8130N |
| Fiberglass % | 10 | 20 | 30 |
| Color | Custom Colors Available Upon Request | ||
| Density g/ml ASTM D792 | 1.01 | 1.08 | 1.18 |
| Melt Flow g/10 min. ASTM D1238 | 8 | 7 | 8 |
| Durometer Shore D ASTM D2240 | N/S | N/S | 85 |
| Tensile Properties: ASTM D638 | |||
| Strength psi | 5000 | 6500 | 10,500 |
| Elong. at yield % | N/S | N/S | 3 |
| Ultimate Elong. at Break | 7 | 5 | 10 |
| Modulus psi | 220,000 | 310,000 | 750,000 |
| Flexural Properties: ASTM D790 | |||
| Strength psi | 6000 | 7000 | 15,000 |
| Modulus psi | 250,000 | 330,000 | 700,000 |
| Izod Notched Impact: ASTM D256 | |||
| @ 23 Deg. C | 0.5 | 0.5 | 2.5 |
| Coef. of Linear Thermal Expan. ASTM D696 | 3 | 3 | 3 |
| Mold Shrinkage (linear) ASTM D955 in/in | 0.010 | 0.010 | 0.003 |
| Flammability UL94 1/16 and 1/8 | HB | HB | HB |
All values are approximations only and are to be used for general design purposes only. Customer should request specific and detail physical characteristics from vendor. Consult with vendor before processing this material or assuming any characteristics.
